Package:
- 1 * FSECS4.12
- 1 * Mini USB
- 1 * VESC Sensor Wire
- 1 * Manual
Specs:
- Hardware:V4.12
- EPRM:60000
- Firmware: V3.40(Keep upgrated with the latest firmware version)
- PCB:4 layers, size: 40*60mm
- Current: 50A continuous / 240A peak,values depend on the mounting and ambient temperature around the device!
- Voltage: 8V-60V (Safe for 3S to 12S LiPo,Voltage spikes may not exceed 60V!)
- Recommended 10S battery
- BEC: 5V@1.5A
- BEC type: Internal driver support
- Timing: Software calibration
- Motor control interface: PPM signal (RC servo), analog, UART, I2C,
- USB or CAN‐bus.
- Cutoff Voltage: Programmable
- Frequency: PWM input
- Governor: No
- Weight: 80g
- FSESC4.12 Size: 110x40x20mm
- Programming card: No
- Reverse: Yes
- Motor wire: 12AWG
- Power cable: 12AWG
Related Products
PRODUCT TYPE: ESC
Spec 30A BLHeli_s: Size: 29 * 12.5 * 5 mm Weight: 6.3g Input Voltage: 2-4S LiPo Continuous Current: 30A Peak/Burst current: 40A ( 10S ) BEC: NO Support FPV Frame: 170mm - 440mm (170 180 190 210 215 220 etc)...
PRODUCT TYPE: ESC
One rule in the FPV industry is that drones will continue to get faster, stronger, and in turn - more power hungry. While some pilots may scoff at 70A ESCs for their current builds, many pilots are pushing high cell...
PRODUCT TYPE: ESC
Packing List: 1 * ESC Spec(2S): Power Supported: 6-10V (2S) Mixer Modes: Mixed / Tank (Switch) Current: Single Channel 2.7A, Peak 6A Chip Size: Approx. 40mm x 22mm / 1.57in x 0.87 in Weight: Approx. 10g / 0.35oz PWM Fixed...
PRODUCT TYPE: Gearbox
Spec(3.7:1, 5.2:1): L: 24.4mm Weight: 46g Spec(14, 19:1, 27:1) L: 33mm Weight: 51g
PRODUCT TYPE: Motor
Shaft output length: 10mm Shaft output diameter: 2mm Motor KV 1400RPM/V 2300RPM/V Idle Current 0.3 A 0.8 A Lipo Cell 2 - 4S 2 - 4S Weight 18 g 18 g Max Cont. Current 5.4 A 13.6 A Max Cont....
