Combat Robot
PRODUCT TYPE: ESC
Spec 30A BLHeli_s: Size: 29 * 12.5 * 5 mm Weight: 6.3g Input Voltage: 2-4S LiPo Continuous Current: 30A Peak/Burst current: 40A ( 10S ) BEC: NO Support FPV Frame: 170mm - 440mm (170 180 190 210 215 220 etc)...
PRODUCT TYPE: ESC
One rule in the FPV industry is that drones will continue to get faster, stronger, and in turn - more power hungry. While some pilots may scoff at 70A ESCs for their current builds, many pilots are pushing high cell...
PRODUCT TYPE: ESC
Packing List: 1 * ESC Spec(2S): Power Supported: 6-10V (2S) Mixer Modes: Mixed / Tank (Switch) Current: Single Channel 2.7A, Peak 6A Chip Size: Approx. 40mm x 22mm / 1.57in x 0.87 in Weight: Approx. 10g / 0.35oz PWM Fixed...
PRODUCT TYPE: Gearbox
Spec(3.7:1, 5.2:1): L: 24.4mm Weight: 46g Spec(14, 19:1, 27:1) L: 33mm Weight: 51g
PRODUCT TYPE: Motor
Shaft output length: 10mm Shaft output diameter: 2mm Motor KV 1400RPM/V 2300RPM/V Idle Current 0.3 A 0.8 A Lipo Cell 2 - 4S 2 - 4S Weight 18 g 18 g Max Cont. Current 5.4 A 13.6 A Max Cont....
PRODUCT TYPE: Motor
Package List: 1 x Gear Motor + ESC 1 x 3pin wire Spec: Reduction Gear Ratio: 1:30 Rated power: 2W Working Voltage: 3.5V - 8V No Load Speed: 6V 530 rpm No Load Current: 6V 40mA 3C rated voltage range:...
PRODUCT TYPE: ESC
Package: 1 * FSECS4.12 1 * Mini USB 1 * VESC Sensor Wire 1 * Manual Specs: Hardware:V4.12 EPRM:60000 Firmware: V3.40(Keep upgrated with the latest firmware version) PCB:4 layers, size: 40*60mm Current: 50A continuous / 240A peak,values depend on the...
PRODUCT TYPE: Motor
For motor detailed information, visit http://www.dys.hk/product/G-Power%20Motor.html http://www.dys.hk/product/BE%20Serie%20MultiRotor%20BL%20Motor.html
PRODUCT TYPE: ESC
Package List: 1*Mini FSECS4.20 1* Micro USB 1* VESC Sensor Wire 1* Manual Specs: Hardware:V4.20 Firmware: Latest Version Amps: 50A continuous,instantaneous current 150A Voltage: 8V-60V(Cells: 3-13S LiPo,Safe for 3S to 12S LiPo，Voltage spikes may not exceed 60V! ) BEC: 5V@1.5A...
PRODUCT TYPE: Switch
Package Contain: 1x open contactor 1x threaded contactor 1x housing 3x M3 20mm cap-head screws 2x M3 nuts 1x piece of sand paper Weight: ~20g (depending on the wire and solder) CAD: https://isaak-malers.github.io/Amp-Boy-Docs/Simplified-90.STEP *This switch is used for...
