Dual Bidirectional Brushed ESC

Packing List:

• 1 * ESC

Spec(2S):

• Power Supported: 6-10V (2S)
• Mixer Modes: Mixed / Tank (Switch)
  
• Current: Single Channel 2.7A, Peak 6A
• Chip Size: Approx. 40mm x 22mm / 1.57in x 0.87 in
• Weight: Approx. 10g / 0.35oz
• PWM Fixed Midpoint: 1500us (+50 -50)
• BEC: 5v (Max 1.5A)
• Tested Motors: N20, 130, 180, 280, 370 (Make sure the motor stall current is below 1.5A @ 6V)

Spec(2S - 4S):

• Power Supported: 6-15V (2S-4S)
• Mixer Modes: Mixed / Tank (Solder J1 for Tank)
• Chip Size: Approx. 53mm x 34mm (w/ capacitor 62mm x 34mm)
  
• Weight: Approx. 38g / 1.24oz
• PWM Fixed Midpoint: 1500us (+50 -50)
• BEC: 5v (Max 3A)
• Tested Motors: 130, 180, 280, 370, 380, 390, 540, 550
  

 

IF YOU WANT TO USE
Mixed Control (throttle/steering):
Channel 2 (or channel 3) (for non-EU controller ch2 is recommended because the joystick is spring-loaded & will automatically return to the center) to control the throttle, 1 channel (or 4 channels) to control the speed difference steering, the throttle ratio is 100%, and the steering ratio is 100%, prioritizing steering.

Two-way Independent Tank:
Equivalent to having two independent ESCs (if you want to simulate driving tank mode, connect the servo three-wire input to the receiver throttle channel 3, and the yellow single-wire to the signal of receiver channel 2.

Two-way Synchronization:
Keep it in mixed control mode. Don't need to connect the single yellow wire.

There's nothing to see here, but I just made you clicked one more time than you needed to. Good job me.